FOR FACE TYPE SEALS
MPS 895® has been developed specifically for leaking stern tubes with face type seals in all sub-sea systems: stern tubes, bow thrusters, CPPs, rudders.
Read More
FOR LIP TYPE SEALS WITH SEAL REVITALISER
An effective additive for Stern Tubes and Bow Thrusters can also be used in CPPs, Rudder Shafts and Rudder Machines
Read More
FOR LIP TYPE SEALS WITH SEAL REVITALISER
An effective additive for Stern Tubes, Bow Thrusters, Azimuth Thrusters and CPPs
Read More
STATIONARY GREASE PUMP KIT is a perfect choice for the application of MPS products delivered in 20 kg containers.
FOR GREASE LUBRICATED SYSTEMS
MPS 898 is very water-resistant and therefore highly suitable for use in situations where water
contamination/ingress is a problem. MPS 898 is recommendable for systems with little or no rotation such as rudders.
Read More
FOR LIP TYPE SEALS – VGP AND ECOLABEL CERTIFIED
MPS 996 BIO is specially designed to re-establish the sealing effect in defective lip seals systems with water ingress, where the use of EALs is regulatory.
Read More
HYDRAULIC ADDITIVES
Stop Leak and Maintainance
HYD additives contain microscopic Teflon (PTFE) and anti-wear, anti-foam, anti-oxidation and anti-corrosion additives.
Read More
MARINE ENGINE TREATMENT AND STOP LEAK
DPM additives are recommended as a sealing additive or performance treatment additive in auxiliary engines and emergency power plants.
Read More
STOP LEAK FOR COOLING SYSTEMS
RADIATOR & BLOCK STOP LEAK is formulated to seal leaks in the marine cooling system. The product is compatible with all modern cooling systems and all types of antifreeze.
Read More
To better assist you with your case, please, fill in the technical form and send us the requested drawings and documents to info@lindemann.dk.
When we have the above, we’ll get back to you with the proposition for the needed product and amount and the best application method.
There are five types of MPS additives. The choice of product depends whether the system is lubricated by oil or grease, type of oil, type of seal and type leak.
Treatment rate is calculated from the total oil volume of the system.
| Type of seal | Water ingress | Oil loss | Product | Treatment rate | |
|---|---|---|---|---|---|
| Face seal | ☑ | ☑ | MPS 895 | 5-10% | |
| Lip seal | ☑ | MPS 896 | 5-10% | ||
| Lip seal | ☑ | ☑ | MPS 896 Special Mix | 100% | |
| Grease lubricated systems | ☑ | ☑ | MPS 898 | 5-100% | |
| Lip seal-EAL Ecolabel | ☑ | ☑ | MPS 996 BIO | 100% | |
